TDC01 Ti
THE ULTIMATE MC CARTRIDGE WITH TITANIUM AND BORON TECHNOLOGY
MC cartridge based on the original TechDAS TDC01 cartridge. Employing the Titanium technology for the unique egg-shaped housing and the cartridge support base section and Boron for cantilever, realize the energetic analog sound in the absolutely quiet, perfectly transparent soundstage.
Major features
• Employs a housing and support base of titanium with special processed hard surface treatment.
• Cantilever made of super high strength and light weight Boron.
• Employs a unique magnetic circuit that enables a high output voltage (0.45mV) with low internal resistance (1.4ohm)
• Semi-line contact stylus tip minimizes any tracing distortion.
• A range of accessories are attached to maximize the superb performance of the cartridge.
SPECIFICATIONS | |
Type: |
Moving Coil (MC) |
Frequency response: | 10 – 50,000 Hz |
Output voltage: | 0.45mV (1kHz) |
Internal impedance: | 1.4 ohm |
Recommended load impedance: | 100 – 200 ohm |
Tracking force recommended: | 2.0 – 2.3g |
Cartridge weight: | 17g |
Cantilever: | Pure Boron |
Stylus tip: | Semi-line contact (3μm x 30μm) |
Housing: | Titanium with special processed hard surface treatment |
Housing base: | Titanium with special processed hard surface treatment + damping treatment |
Channel balance: | 0.5dB (1kHz) |
Channel separation: | over 30dB (1kHz) |
INCUDED ACCESSORIES |
8N LEAD WIRES |
NON-MAGNETIC TWEEZERS |
TITANIUM SCREWS FOR MOUNTING |
NON-MAGNETIC SCREW DRIVER |
DIGITAL STYLUS FORCE GAUGE FOR MC PHONO CARTRIDGE |
REUSABLE CUSTOM DESIGNED PROTECTIVE CASE FOR TRANSPORT |